---
title: "Aerolume AL-4 Stand Proposal for NAMX Toronto, Site H-214"
description: "Our proposal for Aerolume's 12 by 10 m island at NAMX Toronto: a full-scale AL-4 cabin, four zones and 25-minute demo slots with every lead logged."
canonical: "https://formlio.com/documents/calgary-exhibition-stand-proposal"
locale: "en"
type: "document"
lastModified: "2026-11-11"
alternates:
  fr: "https://formlio.com/fr/documents/calgary-document.md"
---

# Aerolume AL-4 Stand Proposal for NAMX Toronto, Site H-214

## Proposal

### Aerolume at NAMX Toronto

*Electric aircraft prototype on an exhibition stand*

*White exhibition stand with orange accent light*

*Aluminium frame joint detail*

*Visitors around an aircraft wing section*

*LED wall above an empty stand*

*Chinook Works*

## The brief

### What the stand has to do

*Brief and constraints*

Aerolume's first public showing of the AL-4 since its Series B. The stand has one job: get qualified operators into a 25-minute demo slot, and log every one of them.

Island site H-214, 12 by 10 m, 6 m height limit, hall floor rated to 10 kN/m². The full-scale AL-4 cabin mock-up weighs 1,840 kg, which sets the floor, the rigging and the build order.

The main risk is freight. The mock-up leaves Aerolume's Mirabel hangar on 4 October. If it slips past 11 October, we build around a scaled model instead.

## Specification

### The stand in four numbers

Every figure below is checked against the NAMX exhibitor manual, revision 3, and the hall's floor loading certificate.

### Island site H-214

**120 m²**

### Maximum build height

**6 m**

### Cabin mock-up weight

**1,840 kg**

### Demo slots, three days

**96**

## The stand

### Four zones, one route through

Visitors enter at the open corner, see the aircraft first, and leave through the meeting lounge. Footfall modelled at 410 visitors an hour at peak.

### The cabin, full scale

*Full-scale aircraft cabin on a plinth*

### The flight wall

*LED wall showing aerial footage*

### Demo pods

*Three acoustic demo pods*

### Operator lounge

*Meeting lounge on an exhibition stand*

## Principle

Every visitor who sits in the cabin leaves a booked demo behind.

## Method

### Design and build method

Fourteen weeks from signature to doors. Every stage ends in a written sign-off, so a late change has a known cost.

### 1. Concept and 3D model

Three weeks. A real-time model of the stand in the hall, with sightlines from every aisle. Two rounds of changes.

### 2. Engineering and approvals

Stamped structural drawings, rigging-free LED frame calculations and the organiser's stand plan approval, due 3 September.

### 3. Fabrication in Calgary

Five weeks in our Foothills workshop. Modular aluminium frame, FSC plywood skins, every panel numbered for reuse.

### 4. Freight and build

Two trucks east, five build days on site, cabin craned in on day two before the floor is laid around it.

### 5. Show, derig, report

Two crew on stand all three days. Derig in one night, and a lead and footfall report within ten working days.

## References

### Stands we have built for hardware companies

Chinook Works is eleven people. Priya Natarajan leads design and Owen Brisebois runs build; both are named on this job.

> They put a 2.1 tonne drilling rig on a hall floor rated for less and had the load-spread calculations stamped before we asked. The show manager signed it off in a day.

— Tamsin Whitehorse, Head of Events, Albedo Robotics

> Our stand came back from Houston with one damaged panel out of 214. We have now used the same frame at four shows in two countries.

— Marc-André Lussier, Marketing Director, Glacis Hydrogen

> The demo booking flow on the stand fed our CRM directly. We had 61 qualified meetings in the pipeline before the show closed.

— Hana Okabe-Reid, VP Commercial, Stratus Thermal

## Investment

### Three build options

All figures in CAD, plus 13% HST. Fixed for the scope above. Project management is 8% of the line items; contingency is 5% and is only invoiced against a logged change. We recommend the owned modular stand: it pays back by the second show.

#### Hired structure

| Item | Price |
| --- | --- |
| Design and engineering | $19,100.00 |
| Hired frame and printed skins | $31,480.00 |
| Cabin plinth and load plate | $8,460.00 |
| LED wall, pods and AV | $34,640.00 |
| Freight, build and derig | $17,950.00 |
| Project management, 8% | $8,930.00 |
| Contingency, 5% | $6,028.00 |

#### Owned modular stand

| Item | Price |
| --- | --- |
| Design and 3D model | $18,640.00 |
| Engineering and approvals | $6,380.00 |
| Modular frame and skins | $52,970.00 |
| Cabin plinth and load plate | $8,460.00 |
| LED wall, pods and AV | $34,640.00 |
| Freight, build and derig | $23,930.00 |
| Project management, 8% | $11,602.00 |
| Contingency, 5% | $7,831.00 |

#### Owned stand, three shows

| Item | Price |
| --- | --- |
| Owned modular stand | $145,020.00 |
| Storage and refurbishment | $7,840.00 |
| Two further show builds | $37,920.00 |
| Project management, 8% | $15,262.00 |
| Contingency, 5% | $10,302.00 |

- HST: 13%

## Schedule

### Fourteen weeks to doors

Counted back from Tuesday 19 October. Thanksgiving Monday is a non-working day for our crew and the hall. Assumes signature by Friday 9 July.

| Task | Start | End | Duration | Label |
| --- | --- | --- | --- | --- |
| Concept and 3D model, two rounds | 2027-07-12 | 2027-07-31 | 5 days | Design |
| Structural engineering and LED frame calcs | 2027-08-02 | 2027-08-28 | 5 days | Engineering |
| Organiser stand plan approval | 2027-08-30 | 2027-09-04 | 5 days | Engineering |
| Fabrication, Foothills workshop | 2027-08-30 | 2027-10-02 | 5 days | Build |
| Cabin mock-up leaves Mirabel | 2027-10-04 | 2027-10-09 | 5 days | Build |
| Freight Calgary to Toronto | 2027-10-04 | 2027-10-09 | 5 days | Build |
| On-site build, five days | 2027-10-12 | 2027-10-19 | 5 days | Show |
| NAMX open, three days | 2027-10-19 | 2027-10-22 | 5 days | Show |
| Overnight derig | 2027-10-21 | 2027-10-22 | 5 days | Show |
| Lead and footfall report | 2027-10-25 | 2027-11-06 | 5 days | Report |

## Terms

### Assumptions, risks and terms

Stated now, with the number attached, so nothing on this list becomes a surprise in October.

### Excluded from the fee

Space rental, the organiser's mandatory services (power, compressed air, internet, cleaning), hall rigging, catering, staff travel and the cabin mock-up's own freight.

Our estimate for organiser services is 23,400 plus HST. We order them for you and pass them through at cost.

### If the cabin mock-up is late

The plinth is designed to take a 1:4 scale model as well. If the cabin is not on a truck by 11 October, we switch to the model and credit 4,180 from the plinth and rigging lines.

### Payment schedule

50% on signature, 30% on 30 August when fabrication starts, 20% within 14 days of the report. The deposit is non-refundable once materials are ordered.

### Cancellation

Before 30 August, design and engineering at cost. From 30 August, 60% of the fee. Inside 21 days of build, 100%, because freight and crew are committed.

### Changes after sign-off

Each stage closes with a written sign-off. Changes after that are priced in writing before we act on them, drawn from the 5% contingency first.

### Ownership and reuse

Aerolume owns the stand and the 3D files on final payment. Storage in Calgary is 640 a month if you do not take the three-show option.

## Approval

### What happens next

This proposal holds until Friday 2 July 2027. After that our August workshop slot goes to another build, and fabrication would start two weeks later than shown.

### Prepared by

**Priya Natarajan**
Design Director, Chinook Works

Unit 4, 6120 11 Street SE
Calgary AB T2H 2L7
priya@chinookworks.ca

### For approval by

**Danielle Okafor-Lavoie**
Head of Marketing, Aerolume

We can walk your team through the 3D model on a call any weekday before 2 July.

### Approve the stand

By confirming, you approve the option selected above, plus 13% HST, for delivery between 12 July and 6 November 2027, and authorise the 50% deposit invoice. We then book Foothills workshop time and lodge the stand plan with NAMX.
