




What the stand has to do
Aerolume's first public showing of the AL-4 since its Series B. The stand has one job: get qualified operators into a 25-minute demo slot, and log every one of them.
Island site H-214, 12 by 10 m, 6 m height limit, hall floor rated to 10 kN/m². The full-scale AL-4 cabin mock-up weighs 1,840 kg, which sets the floor, the rigging and the build order.
The main risk is freight. The mock-up leaves Aerolume's Mirabel hangar on 4 October. If it slips past 11 October, we build around a scaled model instead.
The stand in four numbers
Every figure below is checked against the NAMX exhibitor manual, revision 3, and the hall's floor loading certificate.
0 m²
Island site H-214
0 m
Maximum build height
0 kg
Cabin mock-up weight
0
Demo slots, three days
Four zones, one route through
Visitors enter at the open corner, see the aircraft first, and leave through the meeting lounge. Footfall modelled at 410 visitors an hour at peak.
Design and build method
Fourteen weeks from signature to doors. Every stage ends in a written sign-off, so a late change has a known cost.
Concept and 3D model
Three weeks. A real-time model of the stand in the hall, with sightlines from every aisle. Two rounds of changes.
Engineering and approvals
Stamped structural drawings, rigging-free LED frame calculations and the organiser's stand plan approval, due 3 September.
Fabrication in Calgary
Five weeks in our Foothills workshop. Modular aluminium frame, FSC plywood skins, every panel numbered for reuse.
Freight and build
Two trucks east, five build days on site, cabin craned in on day two before the floor is laid around it.
Show, derig, report
Two crew on stand all three days. Derig in one night, and a lead and footfall report within ten working days.
Stands we have built for hardware companies
Chinook Works is eleven people. Priya Natarajan leads design and Owen Brisebois runs build; both are named on this job.
Three build options
All figures in CAD, plus 13% HST. Fixed for the scope above. Project management is 8% of the line items; contingency is 5% and is only invoiced against a logged change. We recommend the owned modular stand: it pays back by the second show.
Hired structure
One show. We hire the frame and print single-use skins.
Hired structure
One show. We hire the frame and print single-use skins.
Design and engineering
Hired frame and printed skins
Cabin plinth and load plate
LED wall, pods and AV
Freight, build and derig
Project management, 8%
Contingency, 5%
Owned modular stand
Recommended. Aerolume owns a reusable stand, built for 120 m² and reducible to 60.
Owned modular stand
Recommended. Aerolume owns a reusable stand, built for 120 m² and reducible to 60.
Design and 3D model
Engineering and approvals
Modular frame and skins
Aluminium frame, FSC plywood, 214 numbered panels.
Cabin plinth and load plate
LED wall, pods and AV
Freight, build and derig
Project management, 8%
Contingency, 5%
Owned stand, three shows
The recommended stand, stored between shows and rebuilt twice more in 2028.
Owned stand, three shows
The recommended stand, stored between shows and rebuilt twice more in 2028.
Owned modular stand
The six build lines from the middle option.
Storage and refurbishment
Climate-controlled, Calgary, inspected after each show.
Two further show builds
Freight, crew, LED hire and derig per show.
Project management, 8%
Contingency, 5%
Fourteen weeks to doors
Counted back from Tuesday 19 October. Thanksgiving Monday is a non-working day for our crew and the hall. Assumes signature by Friday 9 July.
Concept and 3D model, two rounds
Structural engineering and LED frame calcs
Organiser stand plan approval
Organiser review, up to five working days.
Fabrication, Foothills workshop
Cabin mock-up leaves Mirabel
Aerolume's freight. Plan B if it slips past 11 October.
Freight Calgary to Toronto
On-site build, five days
NAMX open, three days
Overnight derig
Lead and footfall report
Assumptions, risks and terms
Stated now, with the number attached, so nothing on this list becomes a surprise in October.
Excluded from the fee
Space rental, the organiser's mandatory services (power, compressed air, internet, cleaning), hall rigging, catering, staff travel and the cabin mock-up's own freight. Our estimate for organiser services is 23,400 plus HST. We order them for you and pass them through at cost.
If the cabin mock-up is late
The plinth is designed to take a 1:4 scale model as well. If the cabin is not on a truck by 11 October, we switch to the model and credit 4,180 from the plinth and rigging lines.
Payment schedule
50% on signature, 30% on 30 August when fabrication starts, 20% within 14 days of the report. The deposit is non-refundable once materials are ordered.
Cancellation
Before 30 August, design and engineering at cost. From 30 August, 60% of the fee. Inside 21 days of build, 100%, because freight and crew are committed.
Changes after sign-off
Each stage closes with a written sign-off. Changes after that are priced in writing before we act on them, drawn from the 5% contingency first.
Ownership and reuse
Aerolume owns the stand and the 3D files on final payment. Storage in Calgary is 640 a month if you do not take the three-show option.
What happens next
This proposal holds until Friday 2 July 2027. After that our August workshop slot goes to another build, and fabrication would start two weeks later than shown.
Prepared by
Priya Natarajan Design Director, Chinook Works
Unit 4, 6120 11 Street SE Calgary AB T2H 2L7 priya@chinookworks.ca
For approval by
Danielle Okafor-Lavoie Head of Marketing, Aerolume
We can walk your team through the 3D model on a call any weekday before 2 July.
Approve the stand
By confirming, you approve the option selected above, plus 13% HST, for delivery between 12 July and 6 November 2027, and authorise the 50% deposit invoice. We then book Foothills workshop time and lodge the stand plan with NAMX.




